June 26, 2026
A 304 stainless steel scale pallet truck with a built-in thermal printer, engineered to combine accurate mobile weighing with washdown-grade durability for the harshest industrial floors.
Most facilities need to weigh a load, document it, and keep the equipment clean — usually with three separate tools. This truck was built to remove that gap.
IP67-rated washdown construction holds up to daily cleaning cycles while keeping weighing accuracy intact, batch after batch.
Stainless construction and waterproof IP68 load cells stand up to constant moisture, foam, and frequent rinse-downs on the floor.
Hygienic, easy-to-clean stainless surfaces meet strict sanitary standards without sacrificing weighing precision.
Rust-resistant stainless steel and sealed electronics keep performing through damp, humid, or corrosive environments.
The built-in thermal printer turns weigh-ins into instant paper records during loading and receiving, letting one operator verify cargo weight, print a ticket, and move the pallet in a single pass — no separate scale, no walk back to a printer.
Specs on paper are one thing. These are the details operators notice on the dock.
Delivers stable, accurate readings even on slightly uneven floors — important on busy docks where a level surface isn't guaranteed.
Prints weight tickets on the spot for receiving and shipping, removing the trip to a separate printer or terminal.
A high-visibility display paired with full-rubber numeric and function keys stays legible and operable in busy, low-light dock areas.
A rechargeable battery with programmable sleep mode and auto power-off keeps the unit running through full shifts without a midday charge.
Auto Tare, Zero, unit switching, counting mode, and weight summation with sequence numbers cover most receiving workflows out of the box.
Most facilities solve weighing and handling separately. Here's where combining them actually pays off.
| Factor | Stainless Scale Pallet Truck | Standard Hand Pallet Truck | Separate Platform Scale + Forklift |
|---|---|---|---|
| Weighing while moving | Built in — weigh, print, and move in one pass | Not possible | Requires stopping at a separate station |
| Washdown durability | IP67 body, IP68 load cells | Varies, often painted steel | Scale electronics rarely washdown-rated |
| Documentation | Built-in thermal printer on the spot | None | Manual entry or separate printer |
| Workflow steps | Single step: load, weigh, print, move | Two steps: move, then weigh elsewhere | Three steps: move, weigh, document |
| Equipment footprint | One unit on the floor | One unit, no scale capability | Multiple separate machines/stations |
| Best fit | Hygiene-critical sites needing weight verification on the move | Simple transport, no weighing needed | High-volume sites with dedicated scale infrastructure |
Both models share the same IP67 stainless construction and electronics — only load capacity and self-weight change.
| Spec | HL20SS | HL30SS |
|---|---|---|
| Load Capacity | 2,000kg | 3,000kg |
| Max Lift Height | 115mm | 115mm |
| Min Lowered Height | 95mm | 95mm |
| Fork Length | 1150 / 1220mm | 1150 / 1220mm |
| Fork Width | 550 / 685mm | 550 / 685mm |
| Self-Weight | 122kg | 135kg |
| Min Weighing Capacity | 10kg | 10kg |
| Rear Wheels | 2 × Ø180×50mm | 2 × Ø180×50mm |
| Front Wheels | 4 × Ø80×70mm | 4 × Ø80×70mm |
Food processing and beverage plants needing weight verification on a washdown-rated floor
Pharmaceutical manufacturers requiring hygienic, easy-to-clean handling and weighing equipment
Chemical plants and cold storage facilities operating in damp or corrosive conditions
Warehousing, shipping, and receiving teams who want to verify weight and print records without a separate station
Operations moving loads up to 2,000–3,000kg that need accurate weighing built into daily transport
Anywhere weighing, documentation, and hygiene compliance all need to happen in a single workflow
